Concluding Steps; Removing 3.5-Inch Hdd Modules - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
Figure 47: Inserting the 3.5-inch HDD module
Ê Insert the HDD module into a drive bay and carefully push back as far as it
will go (1).
Ê Close the locking lever to lock the HDD module in place (2).
I
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your HDD configuration, see
hand" on page
7.2.2.4

Concluding steps

Ê No steps needed.
7.2.3

Removing 3.5-inch HDD modules

Customer Replaceable Unit
(CRU)
Tools: tool-less
150
46.
Upgrade and Maintenance Manual
"Documents you need at
Hardware: 5 minutes
RX2540 M2