Connecting Cables To The Expansion Card; Connecting A Battery Backup Unit To The Expansion Card; Concluding Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Expansion cards and backup units
8.5.6.4

Connecting cables to the expansion card

Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
cables" on page
8.5.6.5

Connecting a battery backup unit to the expansion card

Ê If applicable, connect an FBU cable to the expansion card as described in
section "Connecting the FBU to the RAID controller" on page
8.5.6.6

Concluding steps

"Reassembling" on page 73
Ê
Ê Connect all external cables to the replaced expansion cards.
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Enabling replaced components in the system BIOS" on page 115
Ê
Ê If applicable,"Updating RAID controller firmware" on page
"Enabling SVOM boot watchdog functionality" on page 114
Ê
"Resuming BitLocker functionality" on page 120
Ê
282
559.
Upgrade and Maintenance Manual
"List of used
318.
106.
RX2540 M2