13.5.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Locating the defective server" on page 61
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
"Removing the fan box" on page 397
Ê
13.5.1.2 Removing the front panel cage
Ê Remove the ID card, see
Figure 354: Disconnecting the front panel cables
Ê Disconnect the front panel cable from the system board (1).
Ê If applicable, disconnect the front VGA cable from the system board (2).
Ê Disconnect the front USB3.0 cable from the system board (3).
RX2540 M2
Front panel and external front connectors
figure 437 on page
Upgrade and Maintenance Manual
578.
479