Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 534

System board and components
14.4.2.3 Concluding steps
"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
14.4.3 Replacing the TPM
Upgrade and Repair Unit
(URU)
Tools: Removing the system board:
– Phillips PH2 / (+) No. 2 screw driver/ nut driver 5 mm
Replacing the TPM:
– Bit screw driver
– TPM bit insert
– flat nose pliers
– thin slotted screw driver (2 x 0.4 mm)
( )
* For the Japanese market:
– Dedicated TPM screw driver (CWZ8291A)
– TPM module fixing tool (S26361-F3552-L909)
V
CAUTION!
Advise your contact persons that they must provide you with TPM
backup copies. For security reasons, the TPM must be restored/re-
saved by the customer. After installing a new system board, the TPM
must be enabled. You may not clear the TPM data.
If the contact persons DO NOT have a backup copy available, inform
them that replacing the TPM will cause to lose all data.
534
( )
*
Upgrade and Maintenance Manual
Hardware: 40 minutes
( )
*
RX2540 M2