Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 77

Ê If required, install the rack mounting bracket and rack system into the rack
as described in the Rack Mounting Kit - RMK-F1/F2 DROP-IN Quick
Release Lever (QRL)" Mounting Instructions.
I
The printed poster is contained in the rack mounting kit.
Figure 10: Mounting the server onto the rack rails
Ê Fully extend the rack rails until they lock in place (1).
Ê At a slight angle, lower the server onto the rear mounting point on the rack
rails (2).
Ê Fold down the server (3). Ensure that all six rack mounting bolts are properly
seated in the mounting points on the rack rails (4) and that the locking bars
engage (5).
RX2540 M2
Upgrade and Maintenance Manual
Basic hardware procedures
77