Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 313

8.6.6.5 Connecting a battery backup unit to the expansion card
Ê If applicable, connect an FBU to the GPGPU card riser module 1 as
described in section
page 291.
Ê If applicable, connect an FBU to the GPGPU card riser module 1 as
described in section
8.6.6.6 Concluding steps
"Reassembling" on page 73
Ê
Ê Connect all external cables to the replaced expansion card.
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Enabling replaced components in the system BIOS" on page 115
Ê
Ê If applicable,"Updating RAID controller firmware" on page
"Enabling SVOM boot watchdog functionality" on page 114
Ê
"Resuming BitLocker functionality" on page 120
Ê
RX2540 M2
"Installing the FBU on the riser card holder" on
"Installing the FBU riser module 2" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
302.
106.
313