Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 477

13.4.3 Replacing the front USB3.0 connector
Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
13.4.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Locating the defective server" on page 61
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
"Removing the fan box" on page 397
Ê
13.4.3.2 Removing the front panel module
"Removing the front panel module" on page 455
Ê
13.4.3.3 Removing the front USB3.0 connector
"Removing the front USB3.0 connector" on page
Ê
13.4.3.4 Installing the new front USB3.0 connector
Ê Install the new front VGA connector as described in section
front USB3.0 connector" on page
13.4.3.5 Installing the front panel module
"Installing the front panel module" on page
Ê
RX2540 M2
Front panel and external front connectors
472.
Upgrade and Maintenance Manual
Hardware: 15 minutes
476.
"Installing the
458.
477