Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 472

Front panel and external front connectors
13.3.3.4 Installing the new front VGA connector
Ê Install the new front VGA connector as described in section
front VGA" on page
13.3.3.5 Installing the front panel module
"Installing the front panel module" on page
Ê
13.3.3.6 Concluding steps
"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
13.4 Front USB3.0 connector 3.5-inch versions
13.4.1 Installing the front USB3.0 connector
Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
13.4.1.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Locating the defective server" on page 61
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
472
468.
Upgrade and Maintenance Manual
"Installing the
458.
Hardware: 10 minutes
RX2540 M2