Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 312

Expansion cards and backup units
Ê Remove the GPGPU card as described in section
card (FL)" on page
Figure 206: Removing a riser card
Ê Remove four screws (see circles).
Ê Take the riser card out of the riser card holder.
8.6.6.3 Installing the new GPGPU card
Ê Install the new riser card as described in section
one PCIe slot Gen3 x16" on page
Ê Install the new GPGPU card as described in section
card in a riser module" on page
Ê If applicable, install the riser module 1 as described in section
riser module 1" on page
Ê If applicable, install the riser module 2 as described in section
riser module 2 (FL)" on page
8.6.6.4 Connecting cables to the expansion cards
Ê If applicable, connect internal cables to the expansion cards.
I
For a complete cabling overview, please refer to section
cables" on page
312
298.
285.
286.
289.
301.
559.
Upgrade and Maintenance Manual
"Removing a GPGPU
"Installing a riser card with
"Installing a GPGPU
"Installing the
"Installing the
"List of used
RX2540 M2