Replacing The 8X 2.5-Inch Hdd/Ssd Sas Backplane 2/3; Preliminary Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Installing 2.5-inch HDD/SSD modules" on page 193
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
7.5.2 Replacing the 8x 2.5-inch HDD/SSD SAS
backplane 2/3
Field Replaceable Unit
(FRU)
Tools: flat screw driver
Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
7.5.2.1

Preliminary steps

"Locating the defective server" on page 61
Ê
"Suspending BitLocker functionality" on page 95
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
Ê Remove all HDD/SSD modules from the server as described in section
"Removing 2.5-inch HDD/SSD modules" on page
V
CAUTION!
Ensure that all HDDs are uniquely identified so that you can reinsert
them into their original bays after replacing the HDD backplane.
"Getting access to the component" on page 68
Ê
"Removing the fan box" on page 397
Ê
Ê If applicable, "Removing the SAS expander holder" on page
RX2540 M2
Hard disk drives (HDD) and solid state drives (SSD)
Upgrade and Maintenance Manual
Hardware: 15 minutes
197.
219.
207