Updating Raid Controller Firmware - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Basic software procedures
After replacing the Chassis ID EPROM
Ê Check the SEL log files as described in section
System Event Log (SEL)" on page 117
the system board settings has been transferred to the Chassis ID EPROM:
Chassis IDPROM: BMC FW Backup successful
5.2.3

Updating RAID controller firmware

After replacing the RAID controller, it is essential to upgrade the firmware to the
latest version. The latest RAID controller firmware version is available from the
Fujitsu support web pages at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from firmware updates.
For the Japanese market, follow the instructions provided separately.
Using the ServerView Update Manager
For a detailed description on how to update the RAID controller firmware using
the ServerView Update Manager or Update Manager Express (UME), please
refer to the following manuals:
– ServerView Update Manager:
"ServerView Update Management" user guide
– ServerView Update Manager Express:
"Local System Update for PRIMERGY Servers" user guide
Using the flash tool
The latest firmware files are available as ASPs (Autonomous Support
Packages) for Windows or as DOS tools from the Fujitsu support web pages at:
http://ts.fujitsu.com/support/
http://jp.fujitsu.com/platform/server/primergy/downloads/
Ê Select Drivers & Downloads.
Ê From the Select Product drop down lists, choose your PRIMERGY server or
enter its serial or ident number into the search field.
106
(global market)
(global market)
Upgrade and Maintenance Manual
"Viewing and clearing the
to verify whether a backup copy of
(Japanese market)
(Japanese market)
RX2540 M2