Concluding Steps; Upgrading The 4X 2.5-Inch Pcie Ssd Backplane (Front Side); Preliminary Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
Ê If applicable, connect the two SAS cables to the backplane 3, see
on page 209:
– Cable T26139-Y4040-V32 to backplane connector X10 (1)
– Cable T26139-Y4040-V31 to backplane connector X9 (2)
Ê Connect power cables to the backplane:
– Power cable to (3)
– If applicable, ODD power cable (4)
– If applicable OOB cable (5)
I
For a complete cabling overview, please refer to section
cables" on page
7.5.2.6

Concluding steps

Ê If applicable, "Installing the SAS expander holder" on page 221
"Installing the fan box" on page 399
Ê
"Reassembling" on page 73
Ê
"Installing 2.5-inch HDD/SSD modules" on page 193
Ê
"Connecting the power cord" on page 79
Ê
"Switching on the server" on page 82
Ê
"Resuming BitLocker functionality" on page 120
Ê
7.5.3 Upgrading the 4x 2.5-inch PCIe SSD backplane
(front side)
Field Replaceable Unit
(FRU)
Tools: tool-less
7.5.3.1

Preliminary steps

"Locating the defective server" on page 61
Ê
210
559.
Upgrade and Maintenance Manual
"List of used
Hardware: 10 minutes
figure 110
RX2540 M2