Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 304

Expansion cards and backup units
I
Therefore an already installed RAID controller must be removed, see
"Removing an expansion card" on page 258
expansion card" on page
8.6.3.11 Installing the air duct riser module 2
Figure 200: Preparing the air duct for riser module 2
Ê Break out the blind cover on the left side from the air duct using a side cutter
(see circles).
Figure 201: Installing the air duct
Ê Insert the air duct.
304
256.
Upgrade and Maintenance Manual
and "Installing an
RX2540 M2