Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 358

Main memory
9.3 Removing memory modules
Upgrade and Repair Unit
(URU)
Tools: tool-less
9.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Locating the defective server" on page 61
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
9.3.2 Removing a memory module
Ê Identify the desired memory slot see section
page 349.
V
CAUTION!
Ensure to maintain an operational configuration when removing
memory modules. For additional information, please refer to section
"Basic information" on page
Figure 247: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
358
348.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Memory sequence" on
RX2540 M2