Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 600

Appendix
Setting
JP1 PWD CLR/
1
JP2 BIOS-RCVR
BIOS Flash
3 JP3
Write Protect
16.5 Minimum startup configuration
Field Replaceable Unit
(FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
600
Status
Upgrade and Maintenance Manual
Description
Default: Password delete and
Recovery BIOS options disabled
Password skip enabled
This jumper setting will
permanently delete the current
BIOS password and apply default
BIOS settings.
Recovery BIOS enabled
Default
Flash write protect enable
RX2540 M2