Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 301

8.6.3.8 Removing the slot cover riser module 2
Ê Remove the slot cover as described in section
module 2" on page
8.6.3.9 Installing the riser module 2 (FL)
Ê Install the riser module 2 as described in section
2 (FL)" on page 92
Figure 196: Connecting the power cable
Ê Connect the power cable to both connectors on the GPGPU card and the
connector PWR 12V 3 on the system board as shown.
RX2540 M2
273.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Removing the slot cover riser
"Installing the riser module
301