Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 360

Main memory
"Shutting down the server" on page
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
9.4.2 Removing the defective memory module
Ê Remove the defective memory module as described in section
memory module" on page
9.4.3 Installing a new memory module
Ê Install memory module as described in section
on page 357.
9.4.4 Concluding steps
"Reassembling" on page 73
Ê
"Connecting the power cord" on page 79
Ê
"Updating or recovering the system board BIOS and iRMC" on page 103
Ê
"Switching on the server" on page 82
Ê
"Resetting the error status after replacing memory modules or processors"
Ê
on page 111
"Enabling SVOM boot watchdog functionality" on page 114
Ê
"Enabling replaced components in the system BIOS" on page 115
Ê
"Verifying the memory mode" on page 115
Ê
"Resuming BitLocker functionality" on page 120
Ê
360
358.
Upgrade and Maintenance Manual
65.
"Installing a memory module"
"Removing a
RX2540 M2