Installing The Riser Module 2 (Hl) - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 20: Removing the riser module 2 (B)
Ê Remove five screws (see circles and close-up).
Ê Carefully take out the riser module.
4.8.1.4

Installing the riser module 2 (HL)

Figure 21: Positions of the recesses
Ê Take note of the two recesses in the stabilizer bar (see circles).
88 Upgrade and Maintenance Manual
RX2540 M2