Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 559

15 Cables
This chapter provides information on how to connect, disconnect and route
cables.
Safety notes
V
CAUTION!
Always hold cables by their connectors when disconnecting them.
●
Never pull on the cable to disconnect cables.
Ensure that none of the cables are scraped, strained or otherwise
●
damaged while replacing system components.
Immediately replace cables with damaged shielding.
●
Always use shielded network cables.
●
15.1 List of used cables
No Name
CBL FRONT
C1
PANEL GTL
CBL_USB30_65
C2
0
LTG SATA
C3
CBL_SATA_850
CBL_FRONT_V
C4
GA
C5 CBL PWR 2CO
400
CBL PWR SAS-
C6
BP 660
C8 CBL SAS3.0A500 T26139-Y4040-V26
Table 5: List of used cables
RX2540 M2
Cable number
T26139-Y4015-V301
T26139-Y3999-V505
T26139-Y4028-V304 ODD to system board
T26139-Y3994-V301 Front VGA to system board
T26139-Y3986-V302 ODD to SAS BP 1
T26139-Y3939-V503 SAS BP 1 to system board
Upgrade and Maintenance Manual
Routing
Front panel board to
system board
Front USB3.0 to system
board
SAS controller to expander
board
559