Installing The Air Grid Extension To Riser Module 2; Removing The Rear Air Grid Riser Module 2 - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Expansion cards and backup units
8.5.3.4

Installing the air grid extension to riser module 2

Figure 170: Installing the air grid extension to riser module 2
Ê Position the air grid extension.
I
Make sure that the bracket of the riser card holder is positioned
outside the air grid extension (see closeup).
Ê Fasten the air grid extension with two screws (see circles).
8.5.3.5

Removing the rear air grid riser module 2

Figure 171: Removing the rear air grid
Ê Remove three screw (see circles).
272 Upgrade and Maintenance Manual
RX2540 M2