Installing An Expansion Card In Riser Module 2; Preliminary Steps; Installing A Riser Card; Installing An Expansion Card In A Riser Module - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

8.5.3

Installing an expansion card in riser module 2

Upgrade and Repair Unit
(URU)
Tools: Phillips PZ2 / (+) No. 2 screw driver / nut driver 5 mm
8.5.3.1

Preliminary steps

"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
8.5.3.2

Installing a riser card

Ê Install the riser card as described in section
page 264.
8.5.3.3

Installing an expansion card in a riser module

Ê Install the expansion card as described in section
expansion card in a riser module" on page
RX2540 M2
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
Software: 5 minutes
"Installing a riser card" on
"Installing a PCIe
266.
271