Riser Modules For Gpgpu Cards (Fl); Installing The Riser Module 1 (Fl) - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Basic hardware procedures
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
cables" on page
Ê If applicable, connect an FBU cable to the expansion card as described in
section "Installing an FBU" on page
4.8.2

Riser modules for GPGPU cards (FL)

4.8.2.1

Installing the riser module 1 (FL)

Figure 24: Positions of the recesses
Ê Take note of the two recesses in the stabilizer bar (see circles).
90
"Installing SFP+ transceiver modules" on page
559.
Upgrade and Maintenance Manual
314.
249.
"List of used
RX2540 M2