Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 374

Processor (CPU)
10.3 Removing CPUs
Upgrade and Repair Unit
(URU)
Tool: Phillips PH2 / (+) No. 2 screw driver
10.3.1 Preliminary steps
"Suspending BitLocker functionality" on page 95
Ê
"Disabling SVOM boot watchdog functionality" on page 96
Ê
"Shutting down the server" on page 65
Ê
"Disconnecting the power cord" on page 66
Ê
"Getting access to the component" on page 68
Ê
10.3.2 Removing a CPU
I
This description applies to the following procedures:
– Removing CPU 2 from a 2 CPU configuration
– Removing CPUs from a defective system board
Ê Remove the desired CPU heat sink as described in section
heat sinks" on page
374
387.
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
"Removing CPU
RX2540 M2