Concluding Steps - Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual

Hard disk drives (HDD) and solid state drives (SSD)
Figure 96: Inserting the 2.5-inch HDD module
Ê Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
Ê Close the locking lever in the direction of the arrow until it engages (2).
7.4.2.4

Concluding steps

Ê Refer to the RAID documentation configuring the RAID, see
you need at hand" on page
196
46.
Upgrade and Maintenance Manual
"Documents
RX2540 M2