Fujitsu PRIMERGY RX2540 M2 Upgrade And Maintenance Manual page 486

Front panel and external front connectors
Figure 363: Connecting the front panel cables
Ê Connect the front panel cable to the system board (1).
Ê If applicable, connect the front VGA cable from the system board (2).
Ê Connect the front USB3.0 cable from the system board (3).
Ê Carefully pull the front panel module into its bay and regard that the locking
mechanism snaps in (see circle and
V
CAUTION!
Ensure that none of the cables are strained or damaged.
I
The locking mechanism differs for the installations with LTO drives
because the drive need more place, so that an other locking recess point
is needed.
486 Upgrade and Maintenance Manual
figure364 / 365).
RX2540 M2