Unpacking/Repacking A Device - Siemens 7XV5662-0AC02 Manual

Transport and Storage

2.1 Unpacking/Repacking a Device

2.1 Unpacking/Repacking a Device
Devices are tested prior to delivery. Devices are packed at the factory in a way that meets the requirements of
standard ISO 2248.
Before the device is energized for the first time or following storage, it must be in the final operating area for
at least 2 hours to equalize the temperature, to minimize humidity, and to avoid condensation.
Check the packaging for external transport damage. Damaged packing may indicate that the devices
²
inside have also sustained damage.
Unpack devices carefully; do not use force.
²
Visually check the devices to ensure that they are in perfect mechanical condition.
²
Check the enclosed accessories against the delivery note to make sure that everything is complete.
²
Keep the packaging in case the devices need to be stored or transported elsewhere.
²
Return damaged devices to the manufacturer, stating the defect. Use the original packaging or transport
²
packaging that meets the requirements of standard ISO 2248.
If you need to repack the device, proceed as follows:
If the device is to be transported, pack it in transport packaging.
²
Enclose the supplied accessories and the test certificate in the package.
²
16 Accessories, Communication Converter - Copper/Synchronous Interface, Manual
C53000-B1174-C190-1, Edition 01.2022