Ordering Information For Options Using Codes - Siemens SIMOTRAS 6SG7050 Operating Instructions Manual

01.04
2.2

Ordering information for options using codes

6 S G 7 0
Options
Terminal expansion module (CUD2)
Operation of SIMOTRAS HD converter at temperatures of
65°C
DriveMonitor PC - PMU (RS232) connecting cable, 3m
User-friendly operator control panel (OP1S)
AOP1 adapter for mounting OP1A in cubicle door, including
5m connecting cable
PMU-OP1S connecting cable, 3m
PMU-OP1S connecting cable, 5m
LBA Local bus adapter for the electronics box
LBA is always needed to install supplementary boards
(see Section 5.2.2)
ADB Adapter board
ADB is always needed to install CBC, CBP, EB1, EB2,
SBP and SLB boards
EB1 Terminal expansion board
(miniature-format board; LBA + ADB required)
EB2 Terminal expansion board
(miniature-format board; LBA + ADB required)
CBP2 Communications board with interface for SINEC- L2-
DP, (PROFIBUS)
(miniature-format board; LBA + ADB required)
T300 Technology board
can only be used in temperatures of up to 50°C
(not with H78 option)
Pulse encoder (retrofit)
(2 x 250 pulses/revolution, 15V supply voltage)
Operating Instructions for SIMOTRAS HD
Operating instructions in German
Operating instructions in English
Operating Instructions and DriveMonitor in all the above
languages available on CD-ROM
SIEMENS AG 6SG7000-0BA76
SIMOTRAS HD Operating Instructions
5)
5)
1) 5)
3) 4)
Z
SIMOTRAS HD converter order no. with
suffix Z and
codes (several codes together) and/or
plaintext (if required)
Codes
K00
H78
D76
D64
Type spectrum
Order No.
6RX1700-0AK01
6SX7005-0BA00
6SE7090-0XX84-2FK0
6SX7010-0AA00
6SX7010-0AB03
6SX7010-0AB05
6SE7090-0XX84-4AH0
6SE7090-0XX84-0KA0
6SX7010-0KB00
6SX7010-0KC00
6SX7010-0FF05
6SE7090-0XX87-4AH0
6SG7000-2AC15
6SG7000-0BA00
6SG7000-0BA76
6SG7000-0CD00
2-3