Removing And Installing The Selector Lever Control Cable - Skoda Fabia III 2015 Workshop Manual

Fabia III 2015 ➤, Kamiq 2019 ➤, Karoq 2018 ➤, Karoq 2020 ➤, Octavia III 2013 ➤, ...
Automatic gearbox 09G - Edition 02.2021
6.8 Removing and installing the selector
lever control cable
⇒ a6.8.1 nd installing the selector lever control cable, Octavia
III, Karoq", page 182
6.8.1 Removing and installing the selector
lever control cable, Octavia III, Karoq
Removing
– Shift selector lever to position "N".
– Switch off ignition.
– Remove battery and battery tray ⇒ Electrical system; Rep.
gr. 27; Battery; Removing and installing battery tray.
– Lever off the selector lever control cable -3- from gearshift
lever, e.g. using an open-end wrench -1-.
Note
Do not pay attention to positions -2-, -4- and -arrow-
– Unscrew screws -arrows- and selector lever cable -1- with
cable abutment -4- from the gearbox.
– Unlock the quick-release lock -3- at the mounting bracket -2-
and unhook the selector lever control cable -1-.
182
Rep. gr.37 - Controls, housing