Electrical Sockets; Jumper; Voltage Converter; Output Terminal For Radio Station Power - KAMAZ 5490 Operation Manual

ELECTRICAL SOCKETS

Electrical sockets 24 V/ 10 А are located in the
central part of instrument panel and on passenger's side
(see Fig. Electrical sockets and jumper). Load on each
such electrical socket should not be more than 240 V.
Electrical socket 12 V/ 15 А is located on instru-
ment panel, on passenger's side. Load on such electrical
socket should not be more than 180 W. Electrical socket
12 V/ 15 А serves for power supply to electric equipment
with the voltage 12 V (radio receiver, radio station).
4
1
Electrical sockets and jumper
1 - electrical socket 24 V/ 10 А on the central part of the instrument panel;
2 - electrical socket 24 V/ 10А from passenger's side;
3 - electrical socket 12 V/ 15 А;

JUMPER

To engage the jumper turn the ignition key to posi-
tion «ACC». Further press the jumper in (see Fig. Electri-
cal sockets and jumper).
If the helix got hot, the jumper automatically pro-
trudes. Take the hot jumper only by handle.
2
3
4 – jumper

VOLTAGE CONVERTER

Before switching on the electric equipment with
the voltage 12 V it is necessary to switch on the voltage
converter (to shift the electrical socket to 12 V).
To engage the voltage converter, depress the
voltage converter switch, located on instrument
panel, in its top part. LED (green color) built into
switch comes ON.
To disengage the voltage converter press
on the lower part of the switch. LED built into switch
comes OFF.

OUTPUT TERMINAL FOR RADIO STATION POWER

To connect the radio station to the vehicle net-
work, in the overhead console the power terminal 12 V
(red-white wire - terminal «+», grey wire - terminal «-»)
is provided.
Before switching of the radio station with voltage
12V it is necessary to engage the voltage converter.
4-38
Terminal for radio station
connection