SEQUENCE TO READ DIAGNOSTIC CODES
1. Rotate the instru-
ments-and-starter switch key to
position «ON» (position of mo-
tion).
The home screen ap-
pears.
2. Engage the parking
brake.
Attention!
Diagnostic mode for all systems is possible only
in stationary vehicle (with parking brake engaged).
3. Depress the button
nostics» appears. Depress the «Menu key» button
The menu bar of diagnostics system selection becomes
highlighted.
Main screen
until the screen «Diag-
.
4. With buttons
hicle system (if available) for diagnostics:
- engine;
- brake system;
- after-treatment system;
- air suspension;
- ZF ASTronic gearbox;
- retarder;
- electric equipment.
5. Depress the «Menu
.
key» button
6. Depress the
codes» menu bar.
When you select the «Parameters» line, the screen
with the parameters of the selected electronic control
system received via the CAN data bus opens.
7-4
or
pressed, select the ve-
button to select the «Fault