Oil Fill - KAMAZ 5490 Operation Manual

Maintenance

4.7 Oil Fill

After an oil change or after repairs
NOTES
The transmission and fitted Intarder may only be filled with oil when the vehicle is
horizontal and the engine is switched off. Drain oil. For oil grade and volume refer to table on pages 45 and 46.
Open oil filler plug (9).
Open oil overflow plug (4).
Fill in oil at position 9.
Fill transmission until oil overflows.
Screw oil overflow plug (4) back in with new sealing ring. Screw in oil filler plug (9) with new sealing ring
.
For tightening torques refer to table on pages 45 and 46.
Undertake test run: Distance of 2-5 km.
Test run: Test run:
Do NOT engage Intarder. At beginning, actuate Intarder ONCE, BRIEFLY (max. step)
and then, set it back to step 0.
End of test run:
Vehicle stationary. Do not engage Intarder. Open oil overflow plug (4).
CAUTION
Check oil level again and if necessary, top up with oil until it overflows.
Screw oil overflow plug (4) back in with new sealing ring.
40
6085 758 102b - 2006-10