Drain Residual Coolant At The Stainless Steel Heat Exchanger - KAMAZ 5490 Operation Manual

4.8.2 Drain Residual Coolant at the
Stainless Steel Heat Exchanger
In the case of stainless steel heat exchangers, the
temperature sensor (110) is also the residual coolant drain
plug.
NOTE
After draining the residual coolant, screw in the
temperature sensor with the new sealing ring.
Tightening torque:
Also refer to table on pages 45 and 46.
6085 758 102b - 2006-10
Drain plug for residual coolant
at stainless steel heat exchanger
43
Maintenance
110
027987