KAMAZ 5490 Operation Manual page 108

№
Description of procedure
11 Check the operability of light
emitting devices (LED's), light
and audio alarm. Eliminate faults.
12 Check the wipers and washer op-
eration.
Inspect if any condensate in one
13
of brake receivers.
14 Check the condition of fuel tank
air filter. If necessary, replace it.
Technical requirements and instructions
Switch on the instruments by rotating the ignition key to the first fixed
position.
Check all LED's and light alarm devices for proper operation using the
different positions of light and combination light switch. Check the operabil-
ity of hazard system switch. Test the pilot lamps and horn for normal opera-
tion. Replace faulty lamps
Check the operability of front
headlamps and lights:
- direction indicators (left, right);
- marker and end-outline lamps;
- low beam;
- high beam;
- train lamps;
- additional illumination for poor visi-
bility conditions (if any).
See subsection «Windscreen maintenance».
See subsection «Condensate drain from receivers».
See subsection «Fuel tank air filter».
6-5
Check the condition of rear
lamps:
- direction indicators (left, right);
- stop signal lamp;
- marker and end-outline lamps;
- reverse lamps.