Error Codes, Their Description And Remedial Procedure - KAMAZ 5490 Operation Manual

9.9 ERROR CODES, THEIR DESCRIPTION AND REMEDIAL PROCEDURE

Error code
Function
switched on.
INIT
Timing device EasyStart was switched off,
and then it was switched on again.
The device does not respond to commands.
NO SIGNAL
Heater 1 failure.
Error
Reduced voltage supply.
Temperature sensor is defective.
-°C
Description
of machine recognition
Remedial procedure/ customer
is
Wait until the machine recognition finishes, then set
the exact time and day of the week.
Check the heater fuse, replace if necessary. Contact
the service center.
Contact the service center.
Charge the battery, if necessary, contact the service
center.
Contact the service center.
15