HAZARD SIGNAL SYSTEM ENGAGEGMENT
If any faults critical to traffic safety, be sure to
stop vehicle immediately, engage parking brake and haz-
ard signal system.
To engage hazard signal system, press the
corresponding switch in the upper part of instru-
ment panel.
With this, all direction indicators
lighten and the signal lamp (LED), built into the button,
flashes.
To disengage hazard signal system, depress the
corresponding button again. With this, all direction indi-
cators as well as the signal lamp (LED), built into the
button, go out.
If both stop lights (brake lights) of tractor truck or
trailer/semitrailer are faulty, once the brake pedal is
depressed, the hazard warning lights become active.
7-2