KAMAZ 5490 Operation Manual page 112

№
Description of procedure
3 Check visually the state of and
fastening of front spring brack-
ets.
4 Check the state and attachment
of wheel disks.
5 Check the fastening of brake
chambers.
6 Inspect visually the state and
fastening of torque rod.
Technical requirements and instructions
Cracks in brackets and loose rivets are not tolerable.
Front bracket
of front spring
See subsection «Tire maintenance».
Check the fastening ofbrake chambers.
The tightening torque for fastening brake chambers 180 - 220 N⋅m (18 to
22 kgf⋅m).
Securing of the
front axle brake chambers
Inspect visually the state and fastening of upper torque rod brackets.
Vehicle driving is prohibited till fault correction.
6-9
Rear bracket
of front spring
Securing of the drive axle
brake chambers