KAMAZ 5490 Operation Manual page 115

№
Description of procedure
14 Clean the conditioning con-
denser using air blowing.
15 Grease the bolster, the saddle
support surface, the mouth, the
locking gear of bolster and the
bolster kingpin.
16 Top up to norm the oil level in
engine crankcase.
17 Top up to norm the electrolyte
level in storage batteries.
If necessary, clean the storage
batteries' covers of dirt and
dust.
Technical requirements and instructions
Perform air-blast cleaning bleeding the com-
pressed air from on-board or autonomous network.
Grease the bolster through grease cups.
Apply an even layer of grease to the bol-
ster support plate and mouth by brushing.
(see Fig. To grease bolster).
Greases are used in accord with sugges-
tions of Appendices 2, 3.
See subsection «Oil level inspection in crankcase».
See subsection «Storage batteries».
6-12
To grease bolster