KAMAZ 5490 Operation Manual page 138

Screens of mode for diagnostics
of operational parameters.
Screen 1.
The version of software for CBCU unit and the
LCD display firmware language.
Screen 2. Engine:
- crankshaft speed;
- instant fuel consumption;
- pressure in the intake manifold;
- the actuating force applied to accelerator pedal
(per cent).
Screen 3. Engine (continuation):
- output torque (as a percentage of the maximum
torque);
- air temperature in the inlet manifold;
- oil pressure in the engine lubricating system;
- oil level in the lubrication system (10 % - the
«MIN» mark on the dipstick, 90 % - the «MAX» mark
on dipstick).
Screen 4. Temperature of:
- ambient air;
- fuel injection;
- coolant;
- oil.
Screen 5. Controls:
- the actuating force applied to accelerator pedal
(per cent);
- the actuating force applied to brake pedal (per
cent);
- clutch pedal effort (pressed/ not pressed);
- parking brake actuation.
- front axle speed, as an arithmetic mean of the
speeds of the left and right wheels of the front axle;
- relative speed of the front left wheel;
- relative speed of the front right wheel;
- the relative speed of the rear left wheel;
- the relative speed of the rear right wheel.
Screen 7. Stability Control System:
- yaw rate;
- lateral acceleration rate;
- longitudinal acceleration rate;
- vehicle speed at the wheels.
Screen 8. Gearbox:
- speed of the input shaft of the gearbox with au-
tomatic control;
- speed of the output shaft of the gearbox with au-
tomatic control;
-clutch slipping, per cent;
- selected gear;
- engaged gear.
7-7
Screen 6: