Light Shifter; Light For Movement In The Daytime; End-Outline And Side Marker Lamps; Low Beam - KAMAZ 5490 Operation Manual

LIGHT SHIFTER

Vehicle light is switched on and off by light
shifter. Prior light energizing, rotate the ignition key to
position «ON» (motion position).
1
Light shifter
1 - light shifter; 2, 3 - light switch steps
Symbol
Light is switched on/ off for movement during the
0
daytime
End-outline lamps, marker lamps, number plate
light and switch illumination are engaged
Low/ high beam (depending on combination switch
location)
Pilot LED indicating
headlamps engagement in insufficient visibility
conditions (color - green)
Pilot LED indicating rear fog lamps engagement
(color - orange)
2
3
Application
auxiliary illumination

LIGHT FOR MOVEMENT IN THE DAYTIME

Daytime running lights switch on automatically
when ignition key is shifted to «ON» position. Light
0
shifter is in « » position.
Daytime running lights are switched off when low
or high beams or auxiliary illumination headlamps are
engaged in insufficient visibility conditions.

END-OUTLINE AND SIDE MARKER LAMPS

To engage the end-outling and side marker lamps,
shift the light switch to position
plate light and switch illumination are energized.
Turn the light switch to position
1. Turn on the low beam: turn the light switch
to position .
2. Shift combination switch forward till fixation
(see Section «Combination switch»). Pilot lamp will light
on the instrument panel
High beam switches on only after low beam
engagement.
4-15
. With this number

LOW BEAM

.

HIGH BEAM

.