Auxiliary Illumination Headlamps In Insufficient Visibility Conditions And Rear Fog Lamps; Train Lamps; Spotlight Of The Coupler; Flash Beacons - KAMAZ 5490 Operation Manual

AUXILIARY ILLUMINATION HEADLAMPS IN
INSUFFICIENT VISIBILITY CONDITIONS
AND REAR FOG LAMPS
Auxiliary illumination headlamps
in insufficient visibility conditions
1. To switch on turn the light switch to position
.
2. Pull the light switch till position 2 (see Fig.
Light shifter).
With headlamps switched on the pilot LED lights
on the light switch .
Engagement of auxiliary illumination headlamps
in insufficient visibility conditions
and rear fog lamps
1. To engage auxiliary illumination headlamps
and rear fog lights turn the light switch to position
2. Pull the light switch till position 2 (see Fig.
Light shifter).
When auxiliary illumination headlamps and rear
fog lamps are engaged the LEDs
light switch.
At trailer/ semitrailer connection the rear fog
lamps of truck tractor are not active.
.
and light on the
4-16

TRAIN LAMPS

Train lamps are switched on automatically when
trailer/ semitrailer electric equipment is connected to truck
tractor.

SPOTLIGHT OF THE COUPLER

To switch on the spotlight press on the
upper part of spotlight switch located on
instrument panel. When the spotlight is switched
on, the pilot LED, built in the switch, lights up.
To switch off the spotlight press on the lower part
of spotlight switch. When the spotlight is switched off,
the pilot LED, built in the switch, dies out.

FLASH BEACONS

To switch on flash beacons press on the
upper part of the switch located on instrument
panel. When flash beacons are switched on, the
pilot LED, built in the switch, lights up.
To switch off flash beacons press on the lower
part of the switch. When flash beacons are switched off,
the pilot LED, built in the switch, dies out.