KAMAZ 5490 Operation Manual page 136

7. Depress the «Menu key» button
If any faults are available, the following is emitted
to display:
- system name;
- the total number of faults in a unit;
- SPN (number of device connected to a certain
electronic (local) system (sensors, actuators, messages in
CAN data bus);
- FMI - malfunction type code.
Then by pressing
scroll up to 10 active errors in a unit. If there are more
than 10 errors, the further errors can be viewed only after
elimination of those that are already displayed.
8. After viewing the errors, you can return to the
main screen by keeping the
time.
The diagnostics of the other electronic systems in
a vehicle is performed in the same way.
.
and buttons you can
button pressed for a long
For code cracking and failure elimination, please
contact the Service center.
For troubleshooting performed in the service cen-
ters use the OBD connecter, which is located to the left
side of steering column (see Fig. OBD connecter ar-
rangement).
7-5
1
OBD connecter
arrangement
1 - diagnostics connector