KAMAZ 5490 Operation Manual page 114

№
Description of procedure
11 Clean the outer surface of the
radiator frame in the air condi-
tioning system of dirt, wash it
and blow-through.
Clean the corrugated plates of
charge-air cooler
exchanger using blowing with
compressed air.
12 Clean the gearbox and
drive axle breathers.
13 Clean the electromagnetic
compressor clutch using air
blowing
Perform air-blast
cleaning bleeding the
compressed air from on-
board or autonomous
network.
heat-
The breathers must be clean.
Remove breathers prior to
blowing, to prevent the ingress
of contamination into the hole.
It should be possible to turn
breather head by hand.
Perform air-blast cleaning bleeding the com-
pressed air from on-board or autonomous network.
Technical requirements and instructions
Drive axle
breather
6-11
Gearbox breather
Engine Mercedes-Benz