Avaya S8700 Maintenance Manual page 113

ATM Tips
A500 Administration
Is the A500 administered correctly?
1. Enter show signaling summary on the A500 console.
the screen output.
A500:show signaling summary
Port loc VCI
------ -------
A1.1 1
A1.2 2
Figure 4-17. Screen output for the show signaling summary command
a. If an A500 port to which a S8700 Multi-Connect port network is
2. If the A500 was administered using hard-coded PNNI routes to identify
each endpoint, enter show signaling routes on the A500 console.
Figure 4-18 on page 4-40
555-233-143
SAP IntType Signaling
--- ------- -----------
1 Network UNI3.1
2 Network UNI3.1
attached is not listed in this display, it is likely that the port was
administered incorrectly as having no UNI signaling (admin link
command).
Ensure that fields listed have the following values.
Field Value
Network
IntType
If it is User, links will not come up between the EPNs.
Signaling UNI3.1
If it is
UNI3.0
ILMI Preferred value of is No, however this alone does not
prevent links from coming up between the EPNs.
SAP State May or may not be
than just whether the port was marked as UP. (See
highlighted data for SAP State in
shows the screen output from the command.
Figure 4-17
ILMI SAP State
---- ------------
No UP
No UP
, links will not come up between the EPNs.
. Their values depend on more
UP
Figure 4-17
Issue 1 May 2002
shows
State
-----
UP
UP
.)
4-39