Status Pnc - Avaya S8700 Maintenance Manual

Maintenance Commands

status pnc

status pnc [print]
NOTE:
This command is not valid for S8700 IP Connect configurations.
The status pnc command displays a summary of conditions on the active and
standby Port Network Connectivities (PNC). If the PNC is not duplicated, the
screen displays blanks in the PNC-B and other duplication-related fields.
Output
The following display shows a typical result when status pnc is entered on a
system with a single switch node CSS and duplicated PNC.
status pnc
A-PNC
Mode: active
State of Health:
Inter PN Index:
Inter SN Index:
Major Alarms: 0
Minor Alarms: 0
Warning Alarms: 0
SN Locations: 01E
The output shows a new Inter PN Index field. For switches with CSS PNC,
the index contains 6 fields, and for switches with ATM PNC, the index contains 4
fields. The new fields represent the BFDL fault classes.
7-370 Issue 1 May 2002
PORT NETWORK CONNECTIVITY
Duplicated? no
Software Locked?
Standby Busied?
Direct Connect? no
Standby Refreshed?
Interchange Disabled?
State of Health:
Inter PN Index:
Inter SN Index:
Major Alarms:
Minor Alarms:
Warning Alarms:
SN Locations:
B-PNC
Mode:
555-233-143