Avaya S8700 Maintenance Manual page 779

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

ANL-16-L (16-Port Analog Line)

Table 8-23. Test #36 Station Status and Translation Audits and Updates — Continued

Description / Recommendation

The translation update failed. There may be an internal software error. The

ringer update was not performed because of this failure.

This does not indicate a hardware problem. There may be an internal software

error. The ringer update failed.

1. Retry the command at 1-minute intervals up to 5 times.

The software and the port processor have the same status. User-reported

troubles on this port should be investigated by using other port tests, by

examining station wiring, or by examining the station.

The test could not relate the internal ID to the port (no board). This could be

due to incorrect translations, no board is inserted, an incorrect board is

inserted, or an insane board is inserted.

1. Verify that the board's translations are correct. Use the list config

2. If the board was found to be correctly inserted in step 1, issue the busyout

3. Issue the reset board command.

4. Issue the release busy board command.

5. Issue the test board long command.

command and resolve problems.

board command.

This should re-establish the linkage between the internal ID and the port. If

not, verify that a valid board is inserted.

Continued on next page

Issue 1 May 2002

Troubleshooting