Status Switch-Node - Avaya S8700 Maintenance Manual

status switch-node

status switch-node
status switch-node SN# [print]
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command displays the operational status and attributes of the user specified
switch node. The operational status of the active and standby Switch Node Clock
(SNC) circuit packs for the switch node are displayed along with any alarms
logged against the specified switch node.
Parameters
SN# Normally switch node 1 resides in the PPN cabinet, and switch node 2, if present,
resides in the nearest PN cabinet. The switch node number defaults to 1.
Output
The following display shows a typical result when status switch-node is entered.
status switch-node 1
Switch Node Location
1 A-PNC 01E
1 B-PNC 01D
555-233-143
switch node STATUS
Major Minor
Mode Alarms Alarms
active 0 0
standby 0 1
page 1 of 1
Warning Active SNC Standby SNC
Alarms Location Location
0 01E10 01E12
2 01D10 01D12
Issue 1 May 2002 7-393