Test Alarms - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance Commands

test alarms

This command tests the hardware associated with selected alarms

test alarms [auto-page] [failures] [step] [short | long] [repeat-number | clear]

The following default logins may execute this command: system technician,

inads, init, nms.

test alarms step failures

test alarms long clear auto-page

test alarms long failures

This command allows the technician to automatically test all of the hardware that

is associated with the active alarms in the alarm log. This command provides a

query form to help the user narrow the selection of alarmed objects. Once the

form is filled out, the user presses

selected alarm log entries is tested. The results will be displayed in standard test

output and status information will be displayed on the message line as the

command progresses.

Several alarms may be logged against a single maintenance object, each alarm

representing a different problem. Even if there are multiple entries in the alarm

log for a single object, the test alarms command will only test each physical object

The default options for this command are: short, repeat of 1.

Issue 1 May 2002

and the hardware associated with the