Release Commands - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

release commands

release board UUCSS

release maintenance-name [address]

Release commands release specified maintenance objects from the maintenance

busyout state and puts them back into service, assuming the health of the

component(s) permits. Hardware tests specific to the maintenance object are

performed to verify that it is functioning.

For each maintenance object, the release command is entered in the same

fashion as the associated busyout command, except that the word release is

entered instead of busyout . See the description of the related busyout command

for details of command syntax.

If a release command is entered for an object that is not busied out, the command

will abort. Some release commands trigger recovery actions by the system, such

as the refresh of a standby PNC. See the description of the related busyout

command for details of command execution and interactions.

Input parameters consist of specifying the location, if required, of the given

maintenance object. Use the same format as that used for the related busyout

release board 01c11

release data-module 310

release Tone-Clock 2a

release ds1-fac 02e01a

release fiber-link 13

release port UUCSSpp

release station extension

Issue 1 May 2002