Avaya S8700 Maintenance Manual page 982

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance-Object Repair Procedures
Table 8-107. System Technician-Demanded Tests: ATM-SGRP
Order of Investigation
Primary Signaling Link Hardware check (#636)
Layer 2 Status test (#647)
Remote Layer 3 Query test (#1291)
1.
D = Destructive, ND = Nondestructive
Primary Signaling Link Hardware Check (#636)
The ATM-SGRP Signaling Group D-channel port depends on the health of the
TN230X interface circuit pack on which it resides. This test fails if there are
problems with either the ATM-DCH (D-channel port) MO or the TN230X circuit
pack. Investigate the ATM TN230X circuit pack (ATM-TRK) anytime there are
problems with the ATM D-channel port (ATM-DCH).
Table 8-108. Primary Signaling Link Hardware Check (#636)
Error
Test
Code
Result
Description / Recommendation
ABORT
Internal system error
Retry the command at 1-minute intervals up to 5 times.
8
FAIL
There is a problem with the ATM TN230X circuit pack or the ATM signaling
channel (D channel), preventing any ISDN trunk calls until the problem is
resolved.
1. Consult the procedures for the TN230X circuit pack (ATM-TRK) and the
PASS
The basic physical connectivity of the D channel is intact and functional.
1. Try this test repeatedly to ensure the link is up and to uncover any
8-260
Issue 1 May 2002
ATM D channel (ATM-DCH).
transitory problems.
Short Test
Long Test
Sequence
Sequence
X
X
X
X
X
X
Continued on next page
Continued on next page
555-233-143
1
D/ND
ND
ND
ND

Advertisement

Table of Contents
loading

Table of Contents