Duplication Memory Card Leds - Avaya S8700 Maintenance Manual

LED Interpretation

Duplication Memory Card LEDs

The Duplication Memory Card has LEDs that indicate active/standby, fiber link
integrity/activity states. Also see
Testing the Duplication Memory Card LEDs
When you test the LEDs, the DAJ-1 duplication memory card LED should blink
according to the following pattern:
1 second red, 1 second red off, 1 second green, 1 second green off
and so on for a total of one minute.
If the LED shows any of the following flashing patterns, an abnormal condition is
indicated. The following table describes the condition and suggests actions to
take to resolve it.
LED Color Behavior
Red Flashes 1 second, off 3
seconds in a repeating
pattern
Green Flashes on 1 second, off 3
seconds, in a repeating
pattern
LED remains off
continuously
Green or Flashed continuously
Red
6-24 Issue 1 May 2002
''System Shutdown LEDs''.
Indication
The green element is
burned out
The red element is
burned out
The DAJ-1 card is not
getting power, or the
server is hung
The server is hung
Resolution
Replace the server.
Replace the server.
If the server is hung, it
should automatically reboot
itself. If it does not, power it
down and reboot it.
If the server is hung, it
should automatically reboot
itself. If it does not, power it
down and reboot it.
555-233-143